Feed Conversion Ratio (FCR) Calculator
Works out the feed conversion ratio of a batch of broilers, pigs, fish or cattle: the feed eaten divided by the weight the animals put on. Enter the feed used and either the start and end weights or the gain, for the whole group or per animal, in kilograms, pounds or tonnes. Layers are rated per dozen eggs or per kilogram of egg mass and dairy animals per litre or gallon of milk. Optional fields add feed cost per unit of gain, the economic FCR on slaughterhouse weight, and a planner that turns an FCR and a feed price or budget into feed needed, cost and expected harvest.
- Feed and weights cover the same animals over the same period; feed wasted or spilled is counted as eaten, which is how farm FCR is normally recorded.
- Weights are live weights unless you enter slaughter data for the economic FCR; by-product weight is in the same unit as the live weight.
- Benchmarks in the FAQ are rough ranges for comparison only. This is a farm-management estimate, not veterinary or nutritional advice; ask a nutritionist or extension adviser before changing rations.
- Prices are treated as constant over the period; currency is shown in US dollars but works for any currency.
Formula
- Feed and gain are converted to the same mass unit before dividing, so FCR has no unit: 2.25 means 2.25 kg of feed per kg of gain, or 2.25 lb per lb.
- With per-animal weights, the group gain is (final − initial) × number of animals. Animals that died before the end are best counted with their feed but without a final weight, which raises the FCR — the honest figure for the batch.
- A lower FCR is better. Feed efficiency is the inverse (gain ÷ feed): an FCR of 2.25 is a feed efficiency of 0.444, or 44.4% of the feed weight turned into live weight.
- Economic FCR here divides the feed by the weight the slaughterhouse accepts (live weight minus by-products or rejects), so it is always higher than the live-weight FCR for the same feed. FAO describes the same idea for fish farms: the biological ('true') FCR shows the feed potential, while the economic FCR also takes deaths and losses into account and so sets the real feed demand.
- Total feed ÷ animals that left the farm is feed per animal, not a ratio of weights, so it is shown with that label rather than as an FCR.
- Feed cost per unit of gain = FCR × price per unit of feed, after converting the price to the same mass unit.
Worked example: catfish fingerlings grown to 1 lb
- What do you want to calculate?: fcr
- Product type: meat
- Total feed consumed: 1800
- Feed unit: lb
- Animal / product weight unit: lb
- Weight data: weights
- Weights are: perAnimal
- Number of animals: 1000 animals
- Initial weight: 0.2
- Final weight: 1
- Weight gain:
- Number of eggs produced: eggs
- Average egg weight (optional): g
- Milk produced:
- Milk unit: L
- Live weight sent to slaughter:
- Weight of by-products / rejects:
- Animals that left the farm: animals
- Feed conversion ratio (FCR): 2.25
- I know the: budget
- Expected return:
- Weight of feed bought:
- Feed budget: 15000 $
- Cost of feed: 300 $
- Price per: t
1,000 Pangasius fingerlings of 0.20 lb weigh 200 lb in total; at 1 lb each they weigh 1,000 lb, a gain of 800 lb on 1,800 lb of feed. FCR = 1,800 ÷ 800 = 2.25 and feed efficiency = 800 ÷ 1,800 = 0.444. At $300 per metric tonne, the 1,800 lb (816.47 kg) of feed cost $244.94, or $0.31 per lb of gain. Switch to the planner with FCR 2.25 and a $15,000 budget: it buys 50 t (110,231.13 lb) of feed, enough for 110,231.13 ÷ 2.25 = 48,991.61 lb of fish.