Dry Matter Calculator

Guaranteed analysis (as fed) — product 1
%
Crude protein from the label, e.g. “Crude protein (min.) 30%”.
%
%
%
Enter 0% if the analysis is already on a dry matter basis.
%
Any other nutrient on the label, such as ash, calcium or taurine.
Guaranteed analysis (as fed) — product 2
%
%
%
%
%
Biology Updated 5 Nov 2026

Converts the guaranteed analysis on a bag of pet food or livestock feed from the as-fed basis to the dry matter basis, so a 78% moisture canned food can be compared fairly with a 10% moisture kibble. Enter protein, fat, fiber, moisture and one optional extra nutrient for one product, or two products side by side. Two further modes work out dry matter and moisture from a sample's weight before and after drying, and turn dry-matter figures or a dry-matter ration back into as-fed amounts to weigh out.

  • Label values are treated as exact even though guaranteed analyses state minimums (protein, fat) and maximums (fiber, moisture).
  • The combined protein, fat, fiber, moisture and other values on one label cannot exceed 100%.
  • A drying-test sample is dried to a stable weight and is representative of the whole batch of feed.
  • For comparing labels and planning rations only — not veterinary or nutritional advice. Ask a veterinarian or nutritionist about an animal's specific diet.

Formula

Dry matter (DM) % = 100% − moisture %. Nutrient on DM basis = nutrient as fed × 100% ÷ DM %. From a drying test, DM % = dry weight ÷ wet weight × 100%. Back to as fed: nutrient as fed = nutrient DM basis × DM % ÷ 100%, and as-fed amount = dry matter needed ÷ (DM % ÷ 100%).
  • Water dilutes every nutrient, so the same food looks weaker on the label the wetter it is. Dividing by the dry matter fraction removes that dilution and puts all products on a common basis.
  • Pet food labels give protein and fat as minimums and fiber and moisture as maximums, so the dry matter figures are approximate guides rather than exact contents.
  • If a label or test report is already on a dry matter basis, enter 0% moisture and the values pass through unchanged.
  • In a drying test the units cancel, so grams, kilograms, ounces or pounds give the same dry matter %; only weigh both readings in the same unit and subtract the container.
  • Rations for livestock are balanced on dry matter but fed as fed. Dividing the dry matter target by the DM fraction gives the wet weight to put in the feeder.

Comparing a dry and a semi-moist dog food

Inputs
  • I want to…: compare
  • Protein: 30 %
  • Fat: 6 %
  • Fiber: 4 %
  • Moisture: 2 %
  • Others (optional): %
  • Protein: 25 %
  • Fat: 5 %
  • Fiber: 4 %
  • Moisture: 30 %
  • Others (optional): %
  • Weight unit: g
  • Sample weight before drying: 250
  • Sample weight after drying: 87.5
  • Amount of this feed fed (optional):
  • Moisture of the feed: 65 %
  • Nutrient on dry matter basis (optional): 8 %
  • Dry matter to supply (optional): 10

Brand A lists 30% protein, 6% fat and 4% fiber with 2% moisture, so its dry matter is 98% and its protein on a dry matter basis is 30 × 100 ÷ 98 = 30.61% (fat 6.12%, fiber 4.08%). Brand B lists only 25% protein but carries 30% moisture, leaving 70% dry matter: 25 × 100 ÷ 70 = 35.71% protein, 7.14% fat and 5.71% fiber. Once the water is removed, Brand B has more of every nutrient.

Sources & references

  • Common Terms Used in Animal Feeding and Nutrition (Bulletin 1367)
    University of Georgia Cooperative Extension · Retrieved 5 Nov 2026

    Definitions of dry matter (total weight minus water, as a percentage, found by oven drying to a stable weight), dry matter basis and as-fed basis, and advice to compare feeds on a dry matter basis but mix rations as fed.

  • Nutritional Requirements of Small Animals
    Merck Veterinary Manual · Retrieved 5 Nov 2026

    Moisture of canned (60% to over 87%), semimoist (25–35%) and dry (3–11%) pet foods; AAFCO nutrient profiles expressed on a dry matter basis.

Frequently asked questions

How do I convert as-fed to dry matter basis?
Subtract the moisture from 100% to get the dry matter %, then divide the nutrient by that figure and multiply by 100. A canned cat food with 10% protein and 78% moisture has 22% dry matter, so its protein is 10 ÷ 22 × 100 = 45.45% on a dry matter basis — more than many dry foods.
How do I measure the dry matter of hay or silage myself?
Weigh a representative sample, dry it in a microwave, oven or Koster tester until the weight no longer drops, and weigh it again. Dry matter % = dry weight ÷ wet weight × 100. A 250 g silage sample that dries to 87.5 g is 35% dry matter and 65% moisture.
Why do feed reports and rations use dry matter?
Moisture varies widely — canned pet foods range from about 60% to over 87% water while dry foods hold only 3–11% — so comparing as-fed numbers mostly compares water. Nutrient requirements and lab results are stated on a dry matter basis, and the ration is converted back to as-fed weights only when the feed is weighed out.
How much silage do I feed to supply a given amount of dry matter?
Divide the dry matter needed by the dry matter fraction. To supply 10 kg of dry matter from silage with 35% dry matter, feed 10 ÷ 0.35 = 28.57 kg as fed (about 62.99 lb), of which 18.57 kg is water.

Related calculators