Activity Coefficient Calculator

Ion
Whole number, e.g. 1 for Na⁺, −2 for SO₄²⁻, 3 for Fe³⁺. Only z² enters the equation, so the sign does not matter.
Solution
Used for the ionic strength, the ion concentrations and the activity. In dilute water, mol/L and mol/kg are practically equal.
M
Constants
kg^½·mol^−½
0.509 for water at 25 °C, the textbook value 0.5085 rounded (often rounded further to 0.51). It rises slightly with temperature; change it to work at another temperature or solvent.
Activity (optional)
M
Gives the ion's activity a = γ × c.
Chemistry Updated 5 Nov 2026

Estimates the activity coefficient γ of a single ion in a dilute aqueous solution with the Debye–Hückel equations. Enter the ion's charge number and the solution's ionic strength, or let the calculator work out the ionic strength from the concentrations and charges of up to four ions. The limiting law (log γ = −A z² √I) is the default; switch to the extended equation to account for the hydrated ion size, which stays reasonable up to an ionic strength of about 0.1 M. Add the ion's concentration to get its activity, the effective concentration used in equilibrium constants, Ksp and Nernst calculations.

  • The solvent is water at 25 °C unless you change the constants A and B.
  • The electrolyte is fully dissociated and ion pairing or complex formation is ignored.
  • Concentrations in mol/L are treated as equal to molalities in mol/kg, which is accurate for dilute aqueous solutions.

Formula

Ionic strength I = ½ Σ cᵢ zᵢ². Limiting law: log₁₀ γ = −A z² √I. Extended Debye–Hückel: log₁₀ γ = −A z² √I ÷ (1 + B a √I). Activity a = γ × c. For water at 25 °C, A = 0.509 kg^½·mol^−½ and B = 0.328 kg^½·mol^−½·Å⁻¹.
  • γ = 10^(log₁₀ γ). An activity coefficient of 1 means the ion behaves ideally; values below 1 mean the surrounding ionic atmosphere lowers its effective concentration.
  • The ionic strength counts every ion in the solution, not just the one you are interested in. A 1:1 salt such as NaCl has I equal to its concentration; a 2:1 salt such as Na₂SO₄ has I three times its concentration.
  • The limiting law ignores the size of the ion and only works at very low concentrations; this calculator flags ionic strengths above about 0.01 M. The extended equation adds the hydrated ion size a and works up to about 0.1 M.
  • A and B depend on the solvent's dielectric constant and the temperature; the defaults are for water at 25 °C, where physical chemistry texts give A = 0.5085 and B = 0.3281 (with a in Å), rounded here to 0.509 and 0.328. The equations are strictly written for molality (mol/kg), which equals mol/L closely in dilute water.
  • The equations give a single-ion activity coefficient. Only mean ionic activity coefficients of a salt can be measured directly.

Fe³⁺ at an ionic strength of 0.09 M (limiting law)

Inputs
  • Equation: limiting
  • Charge number of the ion (z): 3
  • Ionic strength: direct
  • Concentration unit: M
  • Ionic strength (I): 0.09
  • Ion 1 concentration (c1): 0.02
  • Ion 1 charge (z1): 2
  • Ion 2 concentration (c2): 0.04
  • Ion 2 charge (z2): -1
  • Ion 3 concentration (c3):
  • Ion 3 charge (z3):
  • Ion 4 concentration (c4):
  • Ion 4 charge (z4):
  • Effective ion size (a): 9
  • Ion size unit: A
  • Constant B: 0.328 kg^½·mol^−½·Å⁻¹
  • Constant A: 0.509 kg^½·mol^−½
  • Concentration of this ion (optional):

For a triply charged ion (z = 3) at I = 0.09 M, √I = 0.3 and log₁₀ γ = −0.509 × 3² × 0.3 = −1.3743, so γ = 10^−1.3743 = 0.04224, or about 0.042. Because 0.09 M is well above the limiting law's range, the extended equation with a = 9 Å is more realistic: log₁₀ γ = −1.3743 ÷ (1 + 0.328 × 9 × 0.3) = −1.3743 ÷ 1.8856 = −0.7288, giving γ = 0.1867.

Sources & references

Frequently asked questions

How do I calculate an activity coefficient with the Debye–Hückel equation?
Work out the ionic strength I = ½ Σ cᵢ zᵢ², take its square root, and multiply by −A z² (A = 0.509 for water at 25 °C) to get log₁₀ γ. Then γ = 10^(log₁₀ γ). For Ca²⁺ in 0.001 M ionic strength, log₁₀ γ = −0.509 × 4 × 0.0316 = −0.0644 and γ = 0.862.
When should I use the extended Debye–Hückel equation instead of the limiting law?
Use the limiting law only for very dilute solutions, below an ionic strength of about 0.01 M. Between about 0.01 and 0.1 M, the extended equation, which divides by 1 + B a √I with the hydrated ion size a, is much closer to measured values. Above about 0.1 M, empirical models such as the Davies equation or specific-ion-interaction models are needed.
What is the activity coefficient at an ionic strength of 0.1 for a 2+ ion?
With the limiting law, log₁₀ γ = −0.509 × 4 × √0.1 = −0.6438, so γ = 0.227. The extended equation with a typical ion size of 6 Å (Ca²⁺) gives a higher and more realistic γ of about 0.401, because 0.1 M is outside the limiting law's range.
Why does a higher charge lower the activity coefficient so much?
The charge enters squared, so a 3+ ion feels nine times the effect of a 1+ ion at the same ionic strength. Highly charged ions gather a denser cloud of opposite charge around them, which lowers their effective concentration and their ability to take part in equilibria.

Related calculators