Bar to PSI Converter
Converts pressure between bar and pounds per square inch (psi) in either direction, using the exact definitions behind both units: 1 bar is 100,000 pascals and 1 psi is one pound-force on a square inch, 6,894.757 Pa. Enter a tyre, compressor, hydraulic or scuba-tank pressure, pick the units, and you get the converted value, the factor both ways, the same pressure in kPa and atmospheres, and a quick bar-to-psi and psi-to-bar reference table. Other common pressure units such as kPa, MPa, ksi, atm, kgf/cm² and mmHg are also available.
- Psi uses the avoirdupois pound-force with standard gravity (9.80665 m/s²), as defined by NIST.
- Millimetres and inches of mercury are the conventional units (mercury at 0 °C under standard gravity).
- The converter does not add or remove atmospheric pressure; gauge stays gauge and absolute stays absolute.
Formula
- 1 bar is defined as exactly 100,000 Pa (100 kPa). 1 psi is one pound-force per square inch: 0.45359237 kg × 9.80665 m/s² ÷ (0.0254 m)² = 6,894.757293 Pa, so 1 bar = 100,000 ÷ 6,894.757293 = 14.50377377 psi.
- Every unit is converted through pascals, so any pair works: the value is multiplied by the pascals in one source unit and divided by the pascals in one target unit.
- Other definitions used: 1 atm = 101,325 Pa, 1 kgf/cm² = 98,066.5 Pa, 1 ksi = 1,000 psi, 1 mmHg (conventional) = 133.322387 Pa, 1 inHg = 25.4 mmHg = 3,386.389 Pa.
- The conversion is the same for gauge and absolute pressure: barg converts to psig and bara to psia. Do not mix them; absolute = gauge + local atmospheric pressure (about 1.013 bar or 14.696 psi at sea level).
- Display precision: results of 1 or more are rounded to 4 decimal places with trailing zeros dropped; values within floating-point noise of a 15-significant-digit number are snapped to it first; results below 1 keep 6 significant figures; results of 10¹⁵ or more, or below 10⁻⁶, use scientific notation with 6 significant figures. Factor rows show up to 10 significant figures.
32.5 bar to psi
- Pressure: 32.5
- From: bar
- To: psi
1 bar = 100,000 Pa and 1 psi = 6,894.757293 Pa, so the factor is 100,000 ÷ 6,894.757293 = 14.50377377. 32.5 × 14.50377377 = 471.3726 psi. The same pressure is 3,250 kPa or 32.075 atm. Going back, 471.3726 psi × 0.0689475729 = 32.5 bar.