Cone Volume Calculator

Half the width of the base.
Perpendicular height from the base to the tip (or top face).
Math Updated 31 Oct 2026

Calculates the volume of a cone from its base radius and height, and the volume of a truncated cone (frustum) from its base radius, top radius and height. Use it for an ice-cream cone, a funnel, a heap of sand or gravel, a lampshade or a flower pot. For a right cone you also get the slant height and the surface areas, and every volume is converted to litres, US gallons, cubic metres and cubic feet.

  • The base (and top face of a frustum) is a circle, and the top face is parallel to the base.

Formula

Cone: V = ⅓ π r² h; truncated cone: V = ⅓ π h (R² + R r + r²)
  • A cone holds exactly one third of the cylinder with the same base and height.
  • The cone formula works for oblique cones too, as long as h is the perpendicular height from the base to the apex. Slant height and surface areas are given for right cones only.
  • A frustum is a cone with its tip cut off parallel to the base: the big cone minus the small one gives ⅓πh(R² + Rr + r²).
  • 1 m³ = 1,000 L; 1 US gallon = 3.785411784 L and 1 ft³ = 0.028316846592 m³ exactly.
  • Results of 1 or more are rounded to 4 decimal places, smaller ones to 6 significant figures; results of 10¹⁵ or more, or below 10⁻⁶, use scientific notation.

A cone 9 cm tall with a 4 cm base radius

Inputs
  • Cone type: cone
  • Length unit: cm
  • Base radius: 4
  • Height (h): 9

V = ⅓ × π × 4² × 9 = 48π = 150.7964 cm³. The slant height is √(4² + 9²) = 9.8489 cm.

Sources & references

Frequently asked questions

How do I calculate the volume of a cone?
Multiply the base area πr² by the height and divide by 3. A cone with r = 3 cm and h = 10 cm holds π × 9 × 10 ÷ 3 = 94.25 cm³.
Why is a cone one third of a cylinder?
Slicing a cone parallel to the base gives circles whose radius shrinks steadily to 0 at the tip; adding up those slices (integrating πr²(1 − y/h)² over the height) gives exactly ⅓πr²h.
How do I find the volume of a truncated cone?
Use V = ⅓πh(R² + Rr + r²). A bucket 30 cm across at the bottom, 40 cm at the top and 35 cm deep has R = 20, r = 15 and holds π × 35 × 925 ÷ 3 = 33,903 cm³, about 33.9 L.
How do I estimate a pile of sand or gravel?
A loose heap is close to a cone. Measure the distance round the base (C) and the height, take r = C ÷ 2π, then V = ⅓πr²h.
What if I only know the slant height?
Find the vertical height first: h = √(s² − r²). For s = 13 and r = 5, h = 12, so V = ⅓π × 25 × 12 = 314.16.

Related calculators

Cylinder Volume Calculator Works out the volume of a cylinder from its radius or diameter and height, and the volume of material in a hollow cylinder such as a pipe or tube from its outer and inner diameters. Use it for a water tank, a can, a round column or a post hole. The volume is given in your cubic unit and also in litres, US gallons, cubic metres and cubic feet, with the surface areas of a solid cylinder alongside. Cube Volume Calculator Finds the volume of a cube from its side length, and also works from the surface area, the face diagonal, the space diagonal or the volume itself, so you can get the side of a cube that holds a given amount. Every measurement of the cube is shown together, with the volume converted to litres, US gallons, cubic metres and cubic feet: useful for boxes, storage bins, dice, ice cubes or concrete blocks. Gravel Calculator Estimates how much gravel you need for a driveway, path, patio base or garden bed, by volume and by weight. Describe the area as a rectangle, a circle or a known area, enter the depth of the layer and, if you know it, the density of your gravel (the default is a typical 105 lb/ft³ or 1,680 kg/m³). You get the volume in cubic yards or cubic metres, the weight in tons or tonnes, and, with a price per ton or per cubic yard, the cost of the order. Pythagorean Theorem Calculator Solves a right triangle with the Pythagorean theorem, a² + b² = c². Give any two of the two legs, the hypotenuse, the area and the perimeter, and it finds the missing sides, then adds the area, perimeter, both acute angles and the height dropped onto the hypotenuse. Lengths can be in metric or imperial units, from millimetres to nautical miles, and the area in anything from square millimetres to acres. Handy for checking that a corner is square, sizing a ladder or ramp, or finding a diagonal.